-----Fluke 4322 Automated Pressure Calibration System

Fluke 4322 Automated Pressure Calibration System в Казани

Под заказ

Наши менеджеры обязательно свяжутся с вами и уточнят условия заказа

Плайт 4 платежа по ₽/мес

Запросить счет

Характеристики

Самовывоз из магазина

Курьерская доставка

Описание

Система автоматической калибровки давления Fluke Calibration 4322 позволяет практически любому пользователю откалибровать практически любой манометр, датчик, преобразователь или переключатель, включая вакуумные, составные, устройства абсолютного и высокого давления. Он обеспечивает высококачественную лабораторную работу в очень широком диапазоне, на стенде или на месте.

Особенности:

Контролирует и измеряет давление от вакуума до 10000 фунтов на квадратный дюйм с номинальной точностью ± 0,1% от показаний.
Легкий, компактный, прочный и транспортируемый для калибровки на месте.
Интегрированная система предотвращения загрязнения позволяет выполнять прямую калибровку пневматических и гидравлических датчиков без очистки.
Бортовой насос позволяет проводить автоматическую калибровку от вакуума до 300 фунтов на квадратный дюйм без внешнего источника давления или вакуума.
Эффективная, безопасная, безошибочная калибровка для большинства рабочих нагрузок.

Получить больше информации, ответов на интересующие вас вопросы, подробнее узнать об особенности модели и купить Fluke 4322 Систему автоматической калибровки давления по выгодной цене вы можете в нашем розничном зале или интернет магазине Fluke-online.ru

Характеристики

General Specifications
Power Requirements	100 V ac to 240 V ac (-15 %, +10 %), 50 Hz to 60 Hz
Maximum Power Consumption	Controller: 110 VA Intensifier: 250 VA
Operating Temperature Range	0 °C to 50 °C
Storage Temperature Range	-30 °C to 71 °C
Humidity	5 % to 95 %
Vibration	Meets MIL-T-28800D
Altitude (operation)	2,000 m
Weight	Controller: 12 kg (27 lb) Intensifier: 14 kg (31 lb) Accessory Kit with Handheld Control: 12 kg (27 lb) Nitrogen Cylinder: 12 kg (26 lb)
Dimensions	Controller, Intensifier, and Accessory Kit: 32.5 cm Height x 30.5 cm Width x 30.5 cm Depth (13 in Height x 12 in Width x 12 in Depth) Nitrogen Cylinder: 68.5 cm Height x 17.8 cm Diameter (27 in Height x 7 in Diameter)
Remote Communications Interfaces	RS-232, USB type B, IEEE-488.2, USB type A (PRINTER port only)
Pressure Range	3.5 kPa (0.5 psi) absolute to 70 MPa (10,000 psi)
Operating Medium	Dry nitrogen supply, or ambient air compressed by on-board pump
Warm-up Time	15 minutes fr om power on, after at least 60 minutes ambient temperature acclimation time within the working temperature range

Controller, intensifier, and nitrogen cylinder connections

Unit	Name	Type of Fittings [1]	Maximum Working Pressure Limit
Controller	TEST Port	IQC70 female, located on CPS	70 MPa (10,000 psi)
	SUPPLY Port	IQC70 female
	Hose Purge	IQC70 male
Intensifier	SUPPLY Port	IQC70 female	70 MPa (10,000 psi)
Intensifier	OUTLET Port	IQC70 female	70 MPa (10,000 psi)
Nitrogen Cylinder	VALVE	CGA580 nipple	40 MPa (6,000 psi)
Nitrogen Cylinder	Regulator Outlet	Miniature QC female	20 MPa (3,000 psi)
Notes: ICQ70 is a Fluke Calibration interlocking quick connection nominally rated to 70 MPa (10,000 psi).

Accessory kit fittings

Name	Type of Fittings[1]	Maximum Working Pressure Limit[2]
FITTING, 1/2 MALE PIPE THREAD (NPT)	IQC70 male	70 MPa (10,000 psi)
FITTING, 1/4 MALE PIPE THREAD (NPT)
FITTING, 1/8 MALE PIPE THREAD (NPT)
FITTING, 1/2 FEMALE PIPE THREAD (NPT)
FITTING, 1/4 FEMALE PIPE THREAD (NPT)
FITTING, 1/8 FEMALE PIPE THREAD (NPT)
FITTING, HF4 EQUIVALENT
FITTING, AN6 FEMALE
FITTING, AN4 FEMALE
FITTING, HM4 EQUIVALENT
FITTING, AN6 MALE
FITTING, AN4 MALE
FITTING,1/4 ID HOSE BARB	IQC70 male	700 kPa (100 psi)
FITTING, 1/8 ID HOSE BARB	IQC70 male	700 kPa (100 psi)
Notes: IQC70 is a Fluke Calibration interlocking quick connection nominally rated to 70 MPa (10,000 psi). Working pressures indicated are for adaptors only. Actual pressure capability may be limited by the integrity or maximum working pressure of the fitting to which the adaptor is connected.

Test hoses

Name	Type of Fittings [1]	Maximum Working Pressure Lim it
Test Hose 3 m (10 ft)	IQC70 male at one end, and IQC70 female coupling at the other	70 MPa (10,000 psi)
Interconnect hose 1.8 m (6 ft)	IQC70 male at both ends	70 MPa (10,000 psi)
Supply hose 1.8 m (6 ft)	IQC70 male at one end, and miniature QC at the other	20 MPa (3,000 psi)[2]
Notes: IQC70 is a Fluke Calibration interlocking quick connection nominally rated to 70 MPa (10,000 psi). Hose limited to 3,000 psi due to miniature QC used to connect to the fitting on the regulator.

Measurement specifications

Barometer Module Range	70 kPa to 110 kPa absolute (10 psi to 16 psi)
Pressure Transducer Module Ranges [1]
A150k	3.5 kPa to 150 kPa absolute (0.5 psi to 21.5 psi)
G700k	50 kPa to 700 kPa gauge (7 psi to 100 psi)
G10M	700 kPa to 10 MPa gauge (100 psi to 1,500 psi)
G70M	10 MPa to 70 MPa gauge (1,500 psi to 10,000 psi)
Resolution	To greater of 1 ppm of reading or of 1ppm of 4 psi (0.00004 psi or 2.5 Pa)

Measurement uncertainty

Gauge, Absolute, or Vacuum	Range	Uncertainty[1]
Gauge[2]	-98 kPa to +25 kPa (-14.2 to +4 psi)	±25 Pa (0.004 psi, 0.1 in H2O at 20°C)
Gauge[2]	25 kPa to 70 MPa (4 to 10,000 psi)	±0.1 % of reading
Absolute	3.5 to 130 kPa (0.5 to 19 psi) absolute	±25 Pa (0.004 psi, 0.1 in H2O at 20°C)
Absolute	130 kPa to 70 MPa (19 to 10,000 psi) absolute	±0.1 % of reading
Vacuum[2]	0 kPa to 98 kPa (0 to 29 inHg)	±25 Pa (0.007 inHg)
Notes: [1] Measurement uncertainty defined as the maximum deviation from the indicated value of measured pressure for 1 year after alignment including hysteresis, linearity, repeatability, stability, temperature, humidity effects, and calibration reference standard measurement uncertainty. Expression of uncertainty uses a coverage factor of 2 and conforms with the recommendations of the ISO Guide to the Expression of Uncertainty in Measurement. [2] Negative gauge and vacuum pressure values assume the ambient atmospheric pressure is approximately 101 kPa (14.7 psi) absolute.

Pressure control specifications

Control Precision

greater of ± 28 Pa (0.004 psi) or 0.025 % of reading

Control ranges

Pressure Source	Gauge, Absolute, or Vacuum	Range
On-board Pump	Gauge[1]	-98 kPa (-14.2 psig) to 2 MPa (300 psig)
	Absolute	3.5 kPa (0.5 psi) to 2 MPa (300 psi) absolute
	Vacuum (negative gauge) [1]	0 to 98 kPa (29 inHg)
External Gas Supply	Gauge	28 kPa (4 psig) to 70 MPa (10,000 psig)
	Absolute	130 kPa (19 psi) to 70 MPa (10,000 psi) absolute
[1] Negative gauge and vacuum pressure values assume the ambient atmospheric pressure is approximately 101 kPa (14.7 psi) absolute.

Typical control set times

Measure Mode	Range	Time (seconds) [5]
Gauge [7]	<28 kPa (4 psig)	90 [1] [6]
	28 to 700 kPa (4 to 100 psig)	30 [2]
	700 kPa (100 psig) to 7 MPa (1,000 psig)	30 [3]
	7 MPa (1,000 psig) to 70 MPa (10,000 psig)	60 [4]
Absolute	<14 kPa (2 psi) absolute	180 [1] [6]
	14 to 130 kPa (2 to 19 psi) absolute	90 [1] [6]
	130 to 700 kPa (19 to 100 psi) absolute	30 [2]
	700 kPa (100 psi) to 7 MPa (1,000 psi)	30 [3]
	7 MPa (1,000 psi) to 70 MPa (10,000 psi)	60 [4]
Vacuum [7]
	>88 kPa (26 inHg) vacuum	180 [1] [6]
	0 to 88 kPa (0 to 26 inHg) vacuum	90 [1] [6]
[1] Assumes 1pp cc test volume, uses on-board pump control [2] Assumes 100 cc test volume with external gas supply. [3] Assumes 50 cc test volume with external gas supply. [4] Assumes 25 cc test volume with external gas supply. [5] Set times assume pressure steps of no greater than 10% of target pressure and reflect time to ready using default control limits in dynamic control mode. [6] Times for sub-atmospheric set points assume that the temperature is below the boiling point of any liquid in the UUT and CPS for the target pressure. [7] Negative gauge and vacuum pressure values assume the ambient atmospheric pressure is approximately 101 kPa (14.7 psi) absolute.

Задать вопрос

Вы можете задать любой интересующий вас вопрос по товару или работе магазина.

Наши квалифицированные специалисты обязательно вам помогут.

Отзывы

Возникли вопросы?

Здравствуйте! Меня зовут Дмитрий Кузнецов. Я руководитель отдела «КИПиА».

Готов ответить на все ваши вопросы по товару «Fluke 4322 Automated Pressure Calibration System». Напишите или позвоните мне, если вам нужна консультация или вы хотите оформить заказ.

8 (495) 134-25-99

info@fluke-online.ru

Задайте вопрос специалисту